Baroness FS900, Руководство по обслуживанию

Страница: 95 / 163

Caution
Select a battery that has the same terminal
positions (the positions of the positive and
negative terminals) as the old one.
Installing a battery that has different terminal
positions could cause damage to the cables.
Do not use organic solvents such as benzene,
thinner or gasoline and refrain from using
cleaners.
Do not allow the battery to come in contact
with vinyl chloride containing plasticizer etc.
When handling the battery, keep it in a
horizontal position and install it on the
mounting so that it is horizontal.
If the battery has terminal covers or heat
shield plates attached, re-install them in their
original positions after replacing the battery.
When mounting the battery on the machine,
never hold the battery terminals.
Doing so could cause the terminals to deform,
resulting in poor connections or electrolyte
leaks from around the terminals.
Replace the battery with one that is the same
size.
When replacing the battery, follow these
steps:
Removing the old battery
Important
Be careful when handling the used battery as
it still contains electrical energy.
Stop the engine and remove the key.
Disconnect the negative cable.
Disconnect the positive cable.
Loose the mounting bracket and remove
the old battery.
2
1
4jes59-006
Replacement of Battery_001
1.
2.
3.
4.
1 (-) Cable
2 (+) Cable
Installing a new battery
Install the new battery with the correct
polarities and firmly secure the battery
with the mounting bracket.
1
4jes59-007
Replacement of Battery_002
1 Mounting bracket
Remove the protection cap from the new
battery.
Firmly secure the positive cable to the
positive terminal.
Firmly secure the negative cable to the
negative terminal.
2
3
1
4jes59-008
Replacement of Battery_003
1 (+) Cable
2 (+) Terminal
3 (-) Terminal
1.
2.
3.
4.
Electrical system
FS900
Electrical system
Page 5-21
General inspection and repair