Baroness FS900, Руководство по обслуживанию

Страница: 33 / 163

Piston pump
This converts the mechanical energy of the
engine to fluid energy by using the
reciprocating motion of the piston.
This is located at the center of the machine
to the right of the engine.
Up/down cylinder
These convert the fluid energy from the
pump to mechanical energy (reciprocating
motion), and raise and lower the brush frame
and bucket.
The unit for the brush arm is located in the
upper area of the brush frame, and the units
for the bucket are located on the left and
right of the bucket.
Wheel motor
This converts the fluid energy from the pump
to mechanical energy (rotation motion) in
order to directly drive the machine.
This is located at the rear wheels.
Orbit motor
This converts the fluid energy from the pump
to mechanical energy (rotation motion), and
is located on the right side of the brush
frame.
FPV1 series valve
This is a valve for applying pressure to the
operating machine.
The valve switches direction by a lever
system.
This is located on the right side of the seat.
Line filter
This removes dirt or dust in the outgoing
fluid.
This fulfills an essential role since elements
that could cause major problems may be
circulated if there was no filter.
This is located under the seat on the right
side.
Stack valve
This is configured by the brush frame up/
down valve, brush rotation switch valve,
bucket up/down valve, and bucket lid open/
close valve.
All of these valves operate by a lever
system.
This is located in a reachable location on the
right side of the seat. 1.
2.
3.
4.
5.
6.
7.
Suction filter
This is located between the tank and the
pump so as to ensure that impurities do not
enter the oil.
This is a cartridge-type, and is located under
the seat on the right side. 8.
Hydraulic system
FS900
Hydraulic system
Page 4-5
Specifications