Barnes BARNES 4DSE-HL Series, Инструкция по установке и эксплуатации

Страница: 13 / 32

13
THREE PHASE 480-600 VOLT AC THREE PHASE 480-600 VOLT AC
Power Cable Power Cable Motor Lead Number Motor Lead Number
Green (Ground) Green
Black 1
Red 2
White 3
T4 & T7 Together
T5 & T8 Together
T6 & T9 Together
MOISTURE AND TEMPERATURE SENSORS MOISTURE AND TEMPERATURE SENSORS
Control Cable Control Cable Lead Number Lead Number
Green (Ground) Green
Black P1 (Temperature Sensor)
White P2 (Temperature Sensor)
Red W1 (Moisture Sensor)
Orange W2 (Moisture Sensor)
SECTION: G REPLACEMENT PARTS
G-1 ORDERING REPLACEMENT PARTS:
When ordering replacement parts, ALWAYS furnish the follow-
ing information:
1. Pump serial number and date code. (Paragraph G-4)
2. Pump model number. (Paragraph G-3)
3. Pump part number. (Paragraph G-2)
4. Part description.
5. Item part number.
6. Quantity required.
7. Shipping instructions.
8. Billing Instructions.
G-2 PART NUMBER:
The part number consists of a six (6) digit number, which ap-
pears in the catalog. A one or two letter suffi x may follow this
number to designate the design confi guration. This number is
used for ordering and obtaining information.
G-3 MODEL NUMBER:
This designation consists of numbers and letters which rep-
resent the discharge size, series, horsepower, motor phase
and voltage, speed and pump design. This number is used for
ordering and obtaining information.
G-4 SERIAL NUMBER:
The serial number block will consist of a six digit number,
which is specifi c to each pump and may be preceded by a al-
pha character, which indicates the plant location. This number
will also be suffi xed with a four digit number, which indicates
the date the unit was built (Date Code).
EXAMPLE: A012345
0490 .
Reference the six digit portion (Serial Number) of this number
when referring to the product.
(49J)
(22) & (36)
(32)
FIGURE 8