Bard Site-Rite 5, Инструкция по эксплуатации, Страница: 24 / 40

­1
Instructions­For­Use
­­Site~Rite * ­5­System­Information­
.1
­­­Front­Panel­Controls
Freeze
(In Time Set mode, this button
sets the internal clock to the
displayed values and returns
the system to
Run Mode
.)
Increase­Gain
(In Time Set mode,
this button increases or
toggles the selected field.)
Decrease­Gain
(In
Time Set
mode, this button
decreases or toggles
the selected field.)
Depth
(In Freeze mode , if this but-
ton is held for more than 5
seconds, the system enters
the
Time Set mode
. In
Time Set mode , this button
selects the next field.)
Depth­Markers
Toggles depth
markers on/off.
Print
Sends the current image to the
printer if connected. If a USB
storage device is connected to
the system, this button will also
save the current screen image to
the storage device.
.8
­­­Resetting­the­Site~Rite * ­5­Ultrasound­System
Should the scanner display ever appear blank or show an exclamation mark ( ! ), the system may
need to be reset.
To reset the system:
1. Depress and release the power button located on the front of the Site~Rite 5 scanner.
2. Wait approximately 60 seconds for the unit to reset itself.
3. Power the unit back on per instructions in section 2.7.
On/Off/Reset