1
InstructionsForUse
Precautions(continued)
Caution:
Use water or rubbing alcohol and a soft cloth to remove couplant from the acoustic
window (or face) of the probe. Failure to do so may scratch the acoustic window.
Caution:
Do not to allow ultrasonic couplant to dry on the acoustic window (or face) of the
probe. If the couplant should dry, use water or rubbing alcohol and a soft cloth to
remove it. Never use a tool of any kind to remove dry couplant from the acoustic
window (or face) of the probe.
Caution:
Some commercially available probe covers contain latex. Natural rubber latex may
cause allergic reactions. Refer to the US FDA alert titled: “Medical Alert: Allergic
Reactions to Latex-Containing Medical Devices”, issued March 29, 1991.
Bard Access Systems distributes sterile probe covers and needle guide kits that do
not contain latex.
Caution:
Do not force the probe connector. Damage to the connector and system could result.
Caution:
Always snap the needle guides on to the probe hook. Do not slide the needle guide
on to the needle guide hook, as the sterile sheath may tear.
Caution:
Do not subject the probe to excessive vibration. Vibration may dislodge sensitive
components and cause intermittent or unpredictable operation.
Caution:
Prior to each use please inspect the integrity of all power cords and connectors as
well as the integrity of the unit itself. If any problems are found please discontinue
use immediately and contact an authorized service representative. Use of a damaged
power cord could damage the machine.
Caution:
Unapproved extension cords should not be used with this system. Doing so may
damage the system.
Caution:
During use, the AC connector needs to be easily accessible. In case of emergency
remove the power cord as soon as possible.
Caution:
To avoid unnecessary strain on the user, use the device in a comfortable manner.