Bard Sherlock 3CG Tip Confirmation System Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 40

Bard Sherlock 3CG Tip Confirmation System Скачать руководство пользователя страница 9

Sherlock 3CG™ Tip Confirmation System

Page 4

WARNINGS

This section specifies warnings and precautions specific to the functionality of the Sherlock 3CG™ TCS.

See the Bard Access Systems' catheter Instructions for Use (IFU) for possible complications associated
with peripherally inserted central catheter (PICC) placements and ECG positioning.

See the Bard Access Systems’ Site~Rite Vision™ II Ultrasound System IFU for warnings and precautions
regarding the use of the Site~Rite Vision™ II Ultrasound System.

Warning:

This product should only be operated by qualified medical personnel.

Warning:

Do not power the Sherlock 3CG™ TCS in the presence of flammable anesthetic gases.

Explosion may result.

Warning:

Do not attempt to sterilize the sensor. Damage to the equipment may occur.

Warning:

The following actions void the warranty of the Sherlock 3CG™ TCS and may result in injury or

equipment damage:



Opening or servicing the Sherlock 3CG™ TCS by anyone other than Bard Access Systems’
authorized service personnel.



Removing system labels by anyone other than Bard Access Systems’ authorized service
personnel.



Connecting the sensor or applied patient components to any unauthorized system or accessory.
Refer to Section 1.4 for complete components.



Installation of unauthorized software.



Modification of system settings without authorization by Bard Access Systems.

Warning:

If the Site~Rite Vision™ II Ultrasound System with Sherlock 3CG™ TCS is visibly damaged,

discontinue use immediately. Use of the damaged system may result in injury or equipment damage.

Warning:

Do not submerge the sensor in liquid or allow fluid to enter the connectors. Damage to the

equipment may occur.

Warning:

Sherlock 3CG™ TCS is not intended to diagnose or treat disease.

Warning

: Only Bard Access Systems’ authorized service personnel should attempt to service this

equipment. The Sherlock 3CG™ TCS contains static sensitive components and circuits. Failure to observe
proper static control procedures may result in damage to the system.

Warning:

Do not rely on ECG signal detection for catheter tip positioning when interpretation of the

external or intravascular ECG P-wave is difficult. For example, when



P-wave is not present



P-wave is not identifiable

«
...
7
8
9
10
11
...
»

Содержание Sherlock 3CG Tip Confirmation System









































Отзывы:

Нет отзывов