Bard Sherlock 3CG Tip Confirmation System Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 40

Bard Sherlock 3CG Tip Confirmation System Скачать руководство пользователя страница 28

Sherlock 3CG™ Tip Confirmation System

Page 23

MAGNETIC-NAVIGATION-ONLY MODE

Step 1: Prepare the device.



Connect the sensor to the Site~Rite Vision™ II Ultrasound System via USB cord.



Verify the battery charge is sufficient for the procedure.



Enter Patient Information as needed.

Step 2: Position the patient and perform the ultrasound pre-scan.



Refer to the Bard Access Systems’ Site~Rite Vision™ II Ultrasound System Instructions for
Use.

Step 3: Measure the catheter length.



Refer to Bard Access Systems’ Catheter Instructions for Use.

Step 4: Prepare the sensor.



Place the Sherlock 3CG™ TCS Sensor in the sensor holder and tighten the cinch ring

Step 5: Position the sensor.



Remove the adhesive backing from the sensor holder and place the sensor directly on the
patient's skin with the adhesive side down. Place the sensor as flat as possible for best
results.

Note:

The sensor should be positioned the same for left or right side placements.

«
...
26
27
28
29
30
...
»

Содержание Sherlock 3CG Tip Confirmation System









































Отзывы:

Нет отзывов