Technospot
TM
User Manual
53
Chapter 6:
General Maintenance
Maintaining and servicing Technospot fixtures includes replacing parts and cleaning
the unit.
Safety Considerations
Maintenance
There are no serviceable parts inside the device except for the lamp. The following points have to
be considered when inspecting the fixture for maintenance:
• All screws for installing the devices or parts of the device have to be tightly connected and
must not be corroded.
• Mechanically moved parts must not show any traces of wearing and must not rotate with
unbalances.
• The electric power supply cables must not show any damage, material fatigue or sediments.
Replacing the Lamp
Please review and follow these warnings and cautions before replacing the lamp.
CAUTION: The information in this chapter is intended to assist qualified
personnel
only
.
WARNING: Disconnect power before servicing. Replace fuses with the
specified type and rating only.
WARNING: To avoid electrical shock, disconnect power before re-
lamping or servicing.
UV
An operating, unshielded lamp emits ultraviolet and visible
(UV-vis) radiation which could damage eyes and skin.
Whenever working on or near an exposed lamp, wear
protective eye gear. Never look directly at the lamp while
the lamp is on.
Hot lamp may be an explosion hazard. Do not open for five
minutes after switching off.
Technospot
TM
User Manual
53
Chapter 6:
General Maintenance
Maintaining and servicing Technospot fixtures includes replacing parts and cleaning
the unit.
Safety Considerations
Maintenance
There are no serviceable parts inside the device except for the lamp. The following points have to
be considered when inspecting the fixture for maintenance:
• All screws for installing the devices or parts of the device have to be tightly connected and
must not be corroded.
• Mechanically moved parts must not show any traces of wearing and must not rotate with
unbalances.
• The electric power supply cables must not show any damage, material fatigue or sediments.
Replacing the Lamp
Please review and follow these warnings and cautions before replacing the lamp.
CAUTION: The information in this chapter is intended to assist qualified
personnel
only
.
WARNING: Disconnect power before servicing. Replace fuses with the
specified type and rating only.
WARNING: To avoid electrical shock, disconnect power before re-
lamping or servicing.
UV
An operating, unshielded lamp emits ultraviolet and visible
(UV-vis) radiation which could damage eyes and skin.
Whenever working on or near an exposed lamp, wear
protective eye gear. Never look directly at the lamp while
the lamp is on.
Hot lamp may be an explosion hazard. Do not open for five
minutes after switching off.