CHAPTER 3
Menu System
Technospot
TM
User Manual
27
Set Menu
The Set Parameters menu lets you configure your fixture’s motion, display, lamp, and data source
settings.
To enter the Set menu:
1. Press the
MODE/ESC button to enter the first level of the menu system. The display will
show
Address
and
Info
as the first two options in the top menu level.
The red star
*
indicates the current option.
2. Using the
buttons, scroll to
Set
.
3. Press the
button to select.
Status Options
This menu lets you configure various fixture functions. To set a status option:
1. Navigate to and select the
Set
menu as shown above.
2. Using the
buttons, scroll to
Status
and press the
button to select.
3. Using the
buttons, scroll to one of the status options below and press the
button
to select.
4. Using the
buttons, scroll to the desired setting and press the
button to select.
No DMX Mode
This option determines the fixture state after the DMX signal is removed. You can choose from the
following options:
CloseShutter:
Closes shutter when DMX is removed
Hold:
Holds the current values for all parameters
Auto Program:
Reverts to Auto Program Playback
Music Ctrl:
Reverts to Music Control Playback
Pan Reverse
This menu option inverts the direction of the pan motor to coordinate movements between
fixtures mounted opposite each other horizontally.
The default setting is
Off
. Select
On
to invert the fixture’s Pan motion.
Tilt Reverse
This menu option inverts the direction of the tilt motor to coordinate movements between fixtures
on a link facing each other vertically.
The default setting is
Off
. Select
On
to invert the fixture’s Tilt motion.
MODE
/ ESC
CHAPTER 3
Menu System
Technospot
TM
User Manual
27
Set Menu
The Set Parameters menu lets you configure your fixture’s motion, display, lamp, and data source
settings.
To enter the Set menu:
1. Press the
MODE/ESC button to enter the first level of the menu system. The display will
show
Address
and
Info
as the first two options in the top menu level.
The red star
*
indicates the current option.
2. Using the
buttons, scroll to
Set
.
3. Press the
button to select.
Status Options
This menu lets you configure various fixture functions. To set a status option:
1. Navigate to and select the
Set
menu as shown above.
2. Using the
buttons, scroll to
Status
and press the
button to select.
3. Using the
buttons, scroll to one of the status options below and press the
button
to select.
4. Using the
buttons, scroll to the desired setting and press the
button to select.
No DMX Mode
This option determines the fixture state after the DMX signal is removed. You can choose from the
following options:
CloseShutter:
Closes shutter when DMX is removed
Hold:
Holds the current values for all parameters
Auto Program:
Reverts to Auto Program Playback
Music Ctrl:
Reverts to Music Control Playback
Pan Reverse
This menu option inverts the direction of the pan motor to coordinate movements between
fixtures mounted opposite each other horizontally.
The default setting is
Off
. Select
On
to invert the fixture’s Pan motion.
Tilt Reverse
This menu option inverts the direction of the tilt motor to coordinate movements between fixtures
on a link facing each other vertically.
The default setting is
Off
. Select
On
to invert the fixture’s Tilt motion.
MODE
/ ESC