CHAPTER 2
Setup and Configuration
10
Technospot
TM
User Manual
Use the following steps to mount a Technospot fixture on a standard truss:
1. Fix the clamp on the bracket by tightening the M12 screw on the bracket to the hole in the
center of the bracket.
2. Insert the quick-lock fasteners of the first Omega holder into the respective holes on the
bottom of the fixture. Tighten the quick-lock fasteners fully clockwise.
3. Install the second Omega holder.
1. Omega-holders
2. Clamp
3. Safety cable
4. Quick-lock fastener
CHAPTER 2
Setup and Configuration
10
Technospot
TM
User Manual
Use the following steps to mount a Technospot fixture on a standard truss:
1. Fix the clamp on the bracket by tightening the M12 screw on the bracket to the hole in the
center of the bracket.
2. Insert the quick-lock fasteners of the first Omega holder into the respective holes on the
bottom of the fixture. Tighten the quick-lock fasteners fully clockwise.
3. Install the second Omega holder.
1. Omega-holders
2. Clamp
3. Safety cable
4. Quick-lock fastener