Barco R9841020 Cine VERSUM Master, Руководство по установке

Страница: 97 / 161

15. Module Address Read out/Change
15. MODULE ADDRESS READ OUT/CHANGE
15.1 Default address of the Modules
Introduction
To allow separate remote access to the different modules, an individual address has to be stored in each module.
Overview default address modules
Each module leaves the factory with a default address:
Module Address
Cine VERSUM Master 1
Cine VERSUM 80 9
Cine VERSUM 50 9
Cine VERSUM 120 9
15.2 Reading out/Changing the stored addresses
Overview
• Reading out the stored address
• Changing the stored addresses
15.2.1 Reading out the stored address
Reading out the stored address of a module can be done using the address key on the Remote Control or via
the Display settings menu.
Reading out the stored address using the Remote Control (inclusive Cine VERSUM Master)
1. Point the front of the Remote Control to the IR Receiver of the module you desire to read out the stored address.
2. Press the address key (accessible with the top of a pencil)(On InfraRed Remote Control, page 30).
A message, indicating the address number, appears as on screen message on the active display and also on the graphical
display of the Cine VERSUM Master.
The messages below belong to the Cine VERSUM Master. When pointing the displays, similar messages are generated maybe
with another address. (menu 15-1)
MESSAGE
IR Address: 1
Menu 15-1
Message >IR Address: 1
7 xga75_gs.c03 _________
Menu 15-2
R5976468 CINE VERSUM SYSTEM 03112003 93