Barco R9841020 Cine VERSUM Master, Руководство по установке

Страница: 122 / 161

17. Adjusting the Picture
Only for the Cine VERSUM 80 HD2, three Gamma tables are added to the list, named Film, Graphics and Video.
How to set up the Gamma value
1. Enter the MAIN menu and select the sub menu IMAGE SETTINGS, using the jog dial or the Remote Control. (image 17-11)
Depending the addressed unit:
- Master: The global Image settings menu is displayed, inclusive the menu item
DISPLAY
. The latter has to be selected to enter
the image settings menu for a specific display.
- Display: The Image settings menu for that specific display appears, inclusive the item
GAMMA
.
2. Select the menu item
GAMMA
in the image settings menu for that specific display, by rotating the jog dial on the Master or the
↑ and ↓ keys on the Remote Control.
3. Press the jog dial on the Master or the key ENTER on the Remote Control to confirm.
A table with the available Gamma values appears on-screen and in the graphical display of the Master. The active Gamma
correction is indicated with an asterisk in front of the item.
4. Select the desired Gamma value by rotating the jog dial on the Master or the ↑ and ↓ keys on the Remote Control. Changing the
Gamma value has the following influence on the displayed image:
Gamma Value Influence on the displayed image
γ = 2.2 This is the standard value. With reference to the eye perception, the displayed image is the most
natural image. (Best match between camera recording, projector display and human eye).
1.0 < γ < 2.2 A lower value enhanced the details in the dark image content, without changing the black level,
resulting in a lower contrast perception.
2.2 > γ > 3.1
A higher value occurs a fade away of the details in the dark image content, without changing the
black level, resulting in a higher contrast perception.
Film
Graphics
Video
Gamma tables with lookup tables that can be loaded to enhance Film, Graphics or Video (NTSC,
PAL, SECAM) display.
5. Press EXIT on the Remote Control or press the jog dial on the Master to return.
Gamma value is stored for that specific display unit.
CineVERSUM
Image settings
Advanced Settings
Installation
Service
1 NO MODULE
2 NO MODULE
3 VIDEO [VIDEO]
4 NO MODULE
5 NO MODULE
6 NO MODULE
7 RGB-YUV [RGB]
8 NO MODULE
Shut Down
Back
Image Settings
Master
Brightness
Contrast
Saturation
Tint
Display
Back
Display List
1 CV50 On
2 CV80 On
3 CV120 On
Back
Cine VERSUM r01
If a CV50, CV80 or CV120 is
the only display in the link
CV50 - CV80 - CV120
Main Menu/
Image Settings
/
Display
/
CV80-CV50-CV120
/
Gamma
Gamma
*1.0
1.3
1.6
1.9
2.2
2.5
2.8
3.1
Film*
Graphics*
Video*
Back
* for CV80 only
* only CV120
** only CV120-CV80
*** Only CV80
Image Settings
Display
Brightness
Contrast
Gamma
Color Temperature
Primaries:[Projector]**
White peak: [OFF]***
Lamp mode:[Single]*
Lamp Power:[Normal]*
Master
Back
Image 17-11
Menu Gamma
17.12Adjusting the Color Temperature
Overview
• Selecting the preset Color Temperature
• Customizing the Color Temperature
118 R5976468 CINE VERSUM SYSTEM 03112003