Barco R9841020 Cine VERSUM Master, Руководство по установке

Страница: 35 / 161

5. Location of Controls
Controls function description
Ref. Function Description
1 Function keys To position the PIP image in the displayed image.
2 ADJ (Adjust key) Toggle key to enter or to exit the adjustment mode.
3 Address key
To match the address of the RCU with the Cine VERSUM Master (number between
0 and 9).
4 * key Selecting the aspect ratio of the displayed image to the source.
5
PAUSE To blank the image of the linked displays
6 Standby key To power up/down the Cine VERSUM Master and separately the displays in the link.
7
MUTE
no use
8 ?
no use
9 Digit keys Allow direct input selection and address setting
10 Audio controls
no use
11 Picture controls
Allow to optimize the picture reproduction (Attention: Sharpness control function is
NOT implemented)
12 PHASE Allow to remove image instability
13 FREEZE
Press to freeze the image
14 TEXT Press to remove all on screen display when adjusting picture (Handy when adjusting
picture during a meeting). Press key again for reactivation.
15 ENTER
Press to start the adjustment mode, confirm an adjustment or selection in the
adjustment mode. Press again to leave the adjustment mode.
16 Cursor keys Allow menu selections in the adjustment mode.
17 EXIT Press to leave the adjustment mode via scrolling upwards in the menu structure.
18 RC operation indication Lights up when a key on the remote control is pressed (Visual indication of remote
control operation – Battery check).
Table 5-5
R5976468 CINE VERSUM SYSTEM 03112003 31