Barco R9841020 Cine VERSUM Master, Руководство по установке

Страница: 45 / 161

6. Installation Guidelines
6.2 Plasma Screen Installation Guidelines
Overview
• About Installation of the Unit
• Installation using the Wall mount kit
• Installation using the Table mount kit
6.2.1 About Installation of the Unit
To avoid malfunction, overheating of this unit, and possible fire hazard, make sure that the vents on the main
unit are not blocked when installing. Also hot air is expelled from the air vents, be careful of deterioration and
dirt build up on rear surface wall, etc..
Please be sure to use an M8 (Pitch=1.25mm) bolt. (Only this size bolt can be used.)
Because this unit weights about 40 kg and the lack of depth makes it fairly unstable, please use 2 people or
more when packing, carrying or installing.
This unit incorporates a thin design. To ensure safety if vibrated or shaken, please be sure to take measures
to prevent the unit from tipping over.
Way of installing the unit
Two kits are designed by BARCO for the installation of the unit, a Wall and a Table mount kit.
6.2.2 Installation using the Wall mount kit
How to install the Wall mount kit
1. Be sure to attach in 4 or more locations above and below, left and right of the center line.
2. Use bolts that are long enough to be inserted 12 mm to 18 mm into the main unit from the attaching surfaces for both ’a’ holes
and ’b’ holes. Refer to the side view diagram below.
3. As this unit is constructed with glass, be sure to install it on a flat, not warped surface. (image 6-13, image 6-14, image 6-15)
Image 6-13
Mounting holes
R5976468 CINE VERSUM SYSTEM 03112003 41