Barco R9841020 Cine VERSUM Master, Руководство по установке

Страница: 110 / 161

17. Adjusting the Picture
8. Repeat the same action for all installed Video and RGB modules.
9. Leave the GUI menus:
- Using the jog dial on the Master: scroll in the menu to the bottom until item ’Back’ is pointed and press to confirm. Repeat the
same action if necessary.
- Using the Remote Control: press the EXIT key to leave the menus consecutively or press the ADJ key to leave the menus
at once.
Cine VERSUM System
Image Settings
Advanced Settings
Installation
Service
1 NO MODULE
2 NO MODULE
3 VIDEO [VIDEO]
4 NO MODULE
5 NO MODULE
6 NO MODULE
7 RGB-YUV [RGB]
8 NO MODULE
Shutdown
Back
Menu 17-1
Installation
Input slots
File service
Display list
Internal pattern
When no signal
Source transition
OSD Configuration
Language
Keystone
Global keystone: Yes
Output: [Largest]
Default input balance
Back
Menu 17-2
Input Slots
Slot module [Type]
1 NO MODULE
2 NO MODULE
3 VIDEO [VIDEO]
4 NO MODULE
5 NO MODULE
6 NO MODULE
7 RGB-YUV [RGB]
8 NO MODULE
Back
Menu 17-3
17.2 Adjusting the Image Orientation
Image orientation set up is applicable on the Cine VERSUM 80 and on the Cine VERSUM 120 only.
How to adjust the image orientation
Depending the projector mounting, the orientation of displayed image has to be corrected. This function is available for the projector
display only.
1. Enter the INSTALLATION menu (Setup Video and RGB module for the input signal type, page 105).
2. Select item DISPLAY LIST by rotating the jog dial on the Master or the up/down arrow keys on the Remote Control. (menu 17-4)
3. Press the jog dial on the Master or the key ENTER on the Remote Control to confirm.
The Display List menu appears on-screen and in the graphical display showing the detected displays, inclusive address number,
display name (can be renamed) and status. (menu 17-5)
4. Select the projector you have to correct the image orientation by rotating the jog dial on the Master or the up/down arrow keys
on the Remote Control.
5. Press the jog dial on the Master or the key ENTER on the Remote Control to confirm.
The Display Settings menu for that particular display appears on-screen and in the graphical display showing the specific items
for the selected display (is different for Plasma and Projector display). (menu 17-6)
6. Select item ORIENTATION by rotating the jog dial on the Master or the up/down arrow keys on the Remote Control.
7. Press the jog dial on the Master or the key ENTER on the Remote Control to confirm.
The Orientation menu appears on-screen and in the graphical display showing the 4 possible mounting configuration. (menu 17-7)
106 R5976468 CINE VERSUM SYSTEM 03112003