![background image](http://html.mh-extra.com/html/barco/r9840170/r9840170_manual_4244119024.webp)
24
Menu Setup
Menu Setup
Remark concerning display images
The bold items do not appear
bold
on the screen. This is only done to grasp the attention of the
reader.
Display layout
The two upper lines are a copy of the local LCD of the projector when in Remote Mode or the
contents of the Lamp information module when in Lamp Read Mode.
The third line is in most case a status line, showing all kinds of status information of the Remote
Control.
Different status messages:
ADDR=
displays the address of the remote (for example 1).
BAT=ACT
the remote is working on batteries, there is no supply via external power source.
BAT=LOW
the battery is running low (see "<Installation Setup" for charging procedure)
RF=ACT
the remote is working with wireless communication.
RF=LOW
the remote is working with wireless communication but has not etablished a good
communication link.
INTERNAL TEMP TOO HIGH
The third line may also display the actual Internal Menu main title.
The fourth line is a command line, showing possible key commands.
It also displays the item of the Internal menu.
General Menu structure
The Rugged Remote Control's Internal Menu is accessible by pressing the
<ADJ>
button.
Pressing twice
<ADJ>
gives access to the projector's Menu or exits the Menu.
NO COMMUNICATION
ADDR=1 BAT=LOW/RF=LOW
PRESS <ADJUST> TO ENTER
Line 1
Line 2
Line 3
Line 4
Flowchart 1
MAIN SCREEN
RRC INTERNAL MENU
ADJ
ADJ
MAIN SCREEN
ADJ command not sent to projector
2
nd
ADJ command sent to projector