![background image](http://html.mh-extra.com/html/barco/r9840170/r9840170_manual_4244119033.webp)
33
Menu Setup
Remote Mode Menu
Access to the Remote Mode
1. Press <
ADJ> to enter the Internal Menu (menu 1).
2.
Select
INSTALLATION SETTINGS
by browsing with
3.
Select
OPERATION MODE
by pressing
<ENTER>.
4. Select the Remote Mode by pressing <ENTER>, menu is displayed.
5. Exit the Internal Menu with <EXIT> or <ADJ>.
Remark: The procedure above is only necessary when changing from Lamp read mode to
Remote Mode.
When powered up the remote control always displays the last selected mode.
Browsing in Remote Mode
To browse the different parameters in Remote Mode use the Rugged Remote Control in the
same way as the standard RCU.
In the remote mode the 2 upper lines are a copy of the projector's display
example using a SLM G5 projector (Menu 4) :
NO COMMUNICATION
INSTALLATION SETTINGS
CONT BRIG COLO TINT PHAS
NO COMMUNICATION
INSTALLATION SETTINGS
OPERATION MODE
menu 1
menu 3
menu 2
NO COMMUNICATION
OPERATION MODE
OPER. MODE [REMOTE]
+
-
Menu 4
SLM G5 PERFORMER
STANDBY
COMMUNICATION
COM.PORT [XLR]
Copy of projector display