![background image](http://html.mh-extra.com/html/barco/r9840170/r9840170_manual_4244119032.webp)
32
Lamp Mode Menu
Menu Setup
LAMP
BAT=ACT
PRESS <ADJUST> TO ENTER
Access to the Lamp Read Mode Menu
1. Press <
ADJ> to enter the Internal Menu (menu 1).
2.
Select
INSTALLATION SETTINGS
by browsing with
3.
Select
OPERATION MODE
by pressing
<ENTER> (menu 2).
4.
Select the Lamp Read Mode by pressing
<ENTER>,
menu 4 is displayed.
5. Exit the Internal Menu by pressing <EXIT> or <ADJ>.
Browsing the Lamp Read Mode Menu
To browse the Lamp read Mode Menu when in menu 4 follow next procedure:
1. Browse the different parameters using the buttons (see flowchart 1), the parameter is
shown on line 2 (menu 4)
RUN TIME
ARTICLE NUMBER
SERIAL NUMBER
NUMBER OF STRIKES
REMAINING RUN TIME
LAMP READ MODE
+
-
line 2
menu 4
flowchart 1
+
-
+
-
LAMP
SERIAL NO: ------
OPERATION MODE
OPER. MODE [LAMP READ]
NO COMMUNICATION
INSTALLATION SETTINGS
CONT BRIG COLO TINT PHAS
NO COMMUNICATION
INSTALLATION SETTINGS
OPERATION MODE
menu 1
menu 4
menu 3
menu 2
NO COMMUNICATION
OPERATION MODE
OPER. MODE [REMOTE]