Barco R9040014, Руководство по установке

Страница: 23 / 48

AC Power Connections
5-3 5976257 BARCOREALITY 909 16032001
Switching on the projector
Switching on
The projector is switched ON and OFF using the power (mains)switch.
Pressed : ON
Not pressed : OFF
power switch
Stand by indication lamp :
No light up : projector switched off
Green color : projector in Operational mode
Red color : projector is in Standby mode.
When switching on with the power switch, the projector can start now in :
1 Operational mode (picture displayed)
2 Stand by mode
The way of start up depends on the 'Power up' setting in the service mode.
Switching off
Use the same power switch to switch off the projector
Start up in Operational Mode
The projector can start up with the selected source or
the projector can start up with a warm up cycle message (menu 1).
When this warm up cycle message appears on the screen, the menu offers the possiblity to start with a x minutes taking warm up
periode (press
ENTER ) or to skip this cycle (press EXIT ). The x minutes and the horizontal frequecy can be programmed in the
'Service mode' under the item 'Projector Set Up'.
Note : This warm up periode is built in so that the projector can reach its maximum specifications and minimize all distortions.
When starting this warm up period, a full white image is shifted on the CRT faceplate to avoid a burn in. Every 30 seconds a text
box will be displayed on another place on the screen with the remaining time to go.
The image dimensions can be adjusted with the cursor keys to avoid scanning on the edges of the CRT's.
To interrupt the warm up period, handle as follow :
1
Press EXIT , the warm up menu will be redisplayed with the remaining time indication.
2 Press EXIT again to quit the warm up cycle and to display the source.
21 2))
P O W E R / M A IN S
9QRP
,QRP
)UHT
9
$PS
+]
PROJECTOR WARM UP
A FULL WHITE PATTERN WILL BE
GENERATED FOR x MIN.
FOR IMMEDIATE USE OF THE
PROJCTOR, PRESS <EXIT>
WARNING : SKIPPING THIS
PROCEDURE CAN REDUCE THE
INITIAL PICTURE QUALITY OF THE
PROJECTED IMAGE;
YOU CAN ADJUST THE IMAGE
DIMENSTIONS WITH THE ARROW
KEYS TO AVOID SCANNING ON
THE EDGES OF THE CRT'S;
THIS OPTION CAN BE DISABLED IN
THE SERVICE MENU
with <ENTER>
<EXIT> to return
Menu 1