Barco R9040014, Руководство по установке

Страница: 18 / 48

Installation setup
4-4 5976257 BARCOREALITY909 16032001
J151: Horizontal Red Scan Connector
J251: Horizontal Green Scan Connector
J351: Horizontal Bleu Scan Connector
J152: Vertical Red Scan Connector
J252: Vertical Green Scan Connector
J352: Vertical Bleu Scan Connector
Horizontal Scan connectors
When changing the horizontal scan, insure that all three connectors are set in the same position.
The configuration of each connector is depending on its orientation i.e. on the position of the strap (grey wire).
Vertical Scan connectors
When changing the vertical scan, insure that all three connectors are set in the same position.
The configuration of each connector is depending on its orientation i.e. on the position of the (grey wire) strap A (Image 1) .
After setting the scan connectors, close the metal protection plate and secure it with the retaining screws.Close the top cover and
lock it with the locking screw.
Scan connector settings
The position of the scan connectors for the different mounting configurations can be summarized as follows:
$
Image 1
J152 J252
J352
J152
J252
J352
J152
J252
J352
J152
J252
J352
Configuration2: Front/Ceiling
Configuration3: Front/Table
Configuration4: Rear/Ceiling
Configuration1: Rear/Table