Barco R9040014, Руководство по установке

Страница: 30 / 48

Source Connections
6-6 5976257 BARCOREALITY 909 16032001
Connecting a RGB Analog source to Port 4/5
RGB analog input terminals with separate H and V sync inputs, composite sync input or sync signals on green can be connected
to the projector via Port 4/5. The projector automatically detects where the sync signal is located.
How to select the RGB Analog source :
Select the RGB analog sourcet by pressing the numeric button 4 or 5 on the RCU or the local keypad .
i nver. 75 ohm term .
Connecting a Component Video source to Port 4/5
A component video (R-Y, Y, B-Y) with sync signals can be connected to the projector via Port 4/5. The projector automatically detects
where the sync signal is located.
An HDTV interface is recommended when connecting a computer and local monitor to the projector.
The HDTV Kit Order number : R9828040.
How to select the RGB input Analog source :
Select the component video input by pressing the numeric button 6 on the RCU or the local keypad .
ON OFF
P OW ER / MAIN S
800 pe r iphe r als R G B Comp-/ H-SyncV-Sync
C OMM. POR T POR T 3
P ORT 4 /5
V-nom
I -nom
Freq
See installation instruction s before connecting to the supply.
Voir la notice d 'installation av an t de raccord er au réseau.
120/230 V
7/5 Amp
50/60 Hz
S-VI DEO OFF - O N
75 Ohm
VIDEO green : operation
red : standby
PORT 2
POR T 1
OFF - ON
75 Ohm
PROJECT OR MODE
798
This dev ice com pli es wi th part 15 of
the FC C rul es. Opera ti on i s sub j ect to
f oll ow in g t wo con d itio n s (1). Thi s
dev i ce m ay not cause harm ful i nter-
ference, an d (2) thi s d evi ce must
accep t any interference recei ve d
i nclud ing interference that may cause
undes ired opera ti on"
Interfaces to be used:
An interface is recommended when connecting a computer and local monitor to the projector.
BARCO provides the following interfaces :
1. Universal Analog Interface.
2. RGB 120 MHz Analog Interface.