Barco R9004120 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 105

background image

1. Safety Instructions

1. SAFETY INSTRUCTIONS

1.1 General instructions

Scope

This document includes safety considerations of the Solaris LC40. Throughout this manual, the term SERVICE PERSONNEL refers
to persons having appropriate technical training and experience necessary to be knowledgeable of potential hazards to which they
are exposed (including, but not limited to HIGH VOLTAGE ELECTRIC and ELECTRONIC CIRCUITRY and HIGH BRIGHTNESS
PROJECTORS) in performing a task, and of measures to minimize the potential risk to themselves or other persons. The term
USER and OPERATOR refers to any person other than SERVICE PERSONNEL, AUTHORIZED to operate the installed digital
video distribution system.

General safety instructions

•

Before operating your Solaris LC40, please read this manual thoroughly, and retain it for future use.

•

Installation and preliminary adjustments should be performed by qualified service personnel or authorized service dealers.

•

All warnings on the system parts and in the documentation manual should be adhered to.

•

All instructions for operating and use of this equipment must be followed precisely.

•

All local installation codes should be adhered to.

Owner’s Record

The part number and serial number are indicated on the registration plate which is located at the rear of the Solaris LC40.

Record this number here. Refer to that whenever you call upon your dealer regarding these products.

Name

Parts Number

Serial Number

Dealer

Solaris LC40

Shock Hazard

The lightning flash with an arrowhead within a triangle is intended to tell the user that
parts inside this product are risk of electrical shock to persons.

The exclamation point within a triangle is intended to tell the user that important
operating and/or servicing instructions are included in the technical documentation fo
this equipment.

Image 1-1

1.2 Electrical Safety

Ratings & Grounding

•

These products should be operated from an AC power source. Check if the mains voltage and the load matches the product
electrical ratings.

•

A grounded three-core power cable has to be used. Connect the power cord by inserting it in a grounded electrical outlet,
making sure that the cord is properly grounded.

•

If you are unable to install the AC Requirements, contact your electrician. Do not defeat the purpose of the grounding.

•

Always connect this appliance to an electrically grounded outlet. Never use a ground bypass (cheater) adapter.

R5976672 SOLARIS LC40 01042004

3

«
...
5
6
7
8
9
...
»

Содержание R9004120










































































































Отзывы:

Нет отзывов

Похожие инструкции для R9004120

Бренд: HANNspree Страницы: 18

i3TOUCH Premium P6505 T10

Бренд: i3-TECHNOLOGIES Страницы: 2

Бренд: Samsung Страницы: 41

Бренд: b-red Страницы: 8

Бренд: Sygonix Страницы: 8

Бренд: AG Neovo Страницы: 53

Бренд: NCR Страницы: 14

EEM MOT 01 FL02.01

Бренд: A&A Tech Страницы: 16

Бренд: Feelworld Страницы: 7

Бренд: ACRONIS Страницы: 25

Бренд: Daewoo Страницы: 25

Бренд: AOC Страницы: 51

diamond pro 1000 TFX1105SKTKW

Бренд: Mitsubishi Страницы: 34

Бренд: Livongo Страницы: 36

Бренд: Velleman Страницы: 15

Бренд: ABB Страницы: 11

Industrial enabled Analyzer 9437

Бренд: ABB Страницы: 32

Бренд: Asus Страницы: 27

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды