Source connections
7-1
5975857 BARCOGRAPHICS 1208s 220197
7
SOURCE CONNECTIONS
Signal input connection
The following signals can be connected to the projector through the
inputs on the back panel of the projector :
r
Composite Video
r
S-Video
r
RGB Analog
r
RGB with sync
r
Component Video
r
RGB with Tri-level sync
r
Component video with Tri-level sync
Port No
Projector input
Numeric button
1
Composite Video
1
2
S-Video
1
/ Composite Video
2
2
3
RGB
3
3
4/5
RGB
3
4 or 5
4/5
Component video
4
6
4/5
RGB with Tri-level sync
5
7
4/5
Component video
with Tri-level sync
6
8
Only available when the optional Tri-level sync module is
installed.
1
Input signal :
Y/C (luma/chroma).
2
Input signal :
The Composite video can also be connected to Port
2. It can be selected inside the "Picture Tuning"
menu. Please refer to the Owner's Manual of this
projector.
3
Input signal :
R, G and B with composite sync on Green;
R, G and B with separate composite or with sepa-
rate Horizontal and Vertical sync.
4
Input signal :
R-Y, Y, B-Y with composite sync on Y;
or with separate composite or with separate Hori-
zontal and Vertical sync.
5
Input signal :
R, G and B with Tri-level sync on Green;
R, G and B with separate Tri-level sync or with
separate Horizontal and Vertical Tri-level sync.
6
Input signal :
R-Y, Y, B-Y with Tri-level sync on Y;
or with separate Tri-level sync or with separate
Horizontal and Vertical Tri-level sync.
Connecting a Composite Video source to
Port 1
Composite video signals coming from a VCR, OFF air signal decoder
and so on can be connected to Port 1.
To select the video input :
with the RCU or the local keypad : press the numeric button 1.
75
Ω
Ω
Termination Switch for Video
Terminate the video input of the projector using the 75
Ω
switch next
to the video input when the projector operates alone or when it is the
last projector in the chain when the projectors are connected in a loop-
through configuration.
The switch is set to "ON" : signal terminated.
The switch is set to "OFF" : signal not terminated.
75 ohm
OFF ON
PORT 1
(VIDEO)
PORT 4/5
(RGB - HV)
Comp/H sync V sync
R
G
B
PORT 6
REMOTE
COMMUNICATION
PROJECTOR MODE
POWER/MAINS
PORT 2
(S-VIDEO)
75 ohm
ON
OFF
GREEN : operational
RED : stand-by
357
5
3
4
1
2
PORT 3
75 ohm
OFF ON
PORT 1
(VIDEO)
PORT 4/5
(RGB - HV)
Comp/H sync V sync
R
G
B
PORT 3
PORT 6
RE MOTE
COMMUNICATION
PROJECTOR MODE
POWER/MAINS
PORT 2
(S-VIDEO)
75 ohm
ON
OFF
GREEN : operational
RED : stand-by
358
TV tuner, e.g. TVDM40 stereo
VCR
Audio amplifier
Composite
video
to next projector or
to a monitor
