![background image](http://html1.mh-extra.com/html/barco/r9000893/r9000893_installation-manual_4213998022.webp)
AC power connection
6-4
5975857 BARCOGRAPHICS 1208s 220197
Starting up with a full white image
When the projector is set to start up with a full white image, the
"projector warm up" menu will be displayed for 30 seconds.
Start up with "warm up period"
If no action is taken, a white image will be displayed for 20 minutes.
This white image will be shifted on the faceplate of the CRT to avoid
a CRT burn-in.
During this warm up period, it is possible to interrupt this white image
projection by pressing the <EXIT> key. The "projector warm up"
menu will be re-displayed for another 30 seconds but with the
remaining time indicated.
If the <EXIT> key is pressed again, the remaining warm up period will
be skipped.
During the warm up period, every 30 seconds a text box with the
remaining time will be displayed on the screen for 2 seconds. This text
box will be displayed every time on another place.
If a key, other than the <EXIT> key, is pressed, a text box with the
following text will be displayed :
"Please use <EXIT> to leave this procedure."
Start up without "warm up period"
If the <EXIT> key is pressed, the warm up period will be skipped and
the projector is immediately ready for use.
Warning : skipping this warm up procedure can reduce the initial
picture quality of the projected image.
PROJECTOR WARM UP
A FULL WHITE PATTERN
WILL BE GENERATED FOR
20 MINUTES.
FOR IMMEDIATE USE OF
THE PROJECTOR, PRESS
<EXIT>.
WARNING : SKIPPING THIS
PROCEDURE CAN REDUCE
THE INITIAL PICTURE
QUALITY OF THE PROJECTED
IMAGE.
THIS OPTION CAN BE
DISABLED IN THE SERVICE
MENU
REMAINING
PROJECTOR
WARM UP
TIME
18.5MIN
PLEASE USE
<EXIT> TO
LEAVE THIS
PROCEDURE