5
Overview
•
•
Ordering the EC-200 to EC-210 conversion kit
General
This kit contains all necessary parts and instructions for the customer to upgrade an EC-200 to an EC-210.
1.
Obtain all required tools and materials before beginning the upgrade.
2.
Disassemble the chassis, screen frame, and keyboard assembly components required to gain access to
the parts that the conversion kit replaces.
3.
Remove the EC-200 parts.
4.
Install the EC-210 conversion kit parts.
5.
Reassemble the keyboard assembly, screen frame, and chassis.
Methodology
Read and understand all instructions in this document prior to performing the upgrade.
Most procedures in this guide include multiple steps to gain access to the parts that must be replaced. A
workflow flow chart to all of the procedures and their relationships is provided. Please refer to the flow chart to
familiarize yourself with the sequence of procedures.
Requirements (not provided in the kit)
Required tools
•
Allen wrench 1/16 inch
•
Allen wrench 2 mm
•
Allen wrench 2.5 mm
•
Allen wrench 3 mm
•
Allen wrench 4 mm
•
Nut driver 5 mm
•
Nut driver 5.5 mm
•
Nut driver 8 mm
•
Open-end wrench 5 mm
•
Phillips screwdriver PH1
•
Phillips screwdriver PH2
•
Pliers
24-1701050-00 /01
EC-200 to EC-210 Conversion Kit
