24-1701050-00 /01
EC-200 to EC-210 Conversion Kit
28
Image 2-30: Motherboard connections: USB, reset line, and power supply
1
USB to left side of keyboard at USB561112
2
USB to right side of keyboard at USB910 /
trackball
3
Reset line (attached to Pin 9 of the JFP1 header
on the motherboard)
4
Power to motherboard at EATXPWR1
5
Auxiliary power to motherboard at ATX12V1
Rear I/O plate installation
1.
Fit the rear I/O plate to the inside of the rear panel of the chassis.
2.
Secure the rear I/O plate to the rear panel with the six screws.
Image 2-31: Outside of the rear I/O plate, showing the six screw positions
3.
Attach the Ethernet LED cable (90409590EF) to J5 on the Ethernet board.
Image 2-32: Rear I/O plate and Ethernet board connections
1
Rear I/O plate HDMI connections
2
Rear I/O plate USB connections
3
Rear I/O plate Ethernet connections
4
Ethernet LED cable connection
5
Power switch
