![background image](http://html.mh-extra.com/html/barco/r767302k/r767302k_instructions-manual_474433022.webp)
24-1701050-00 /01
EC-200 to EC-210 Conversion Kit
22
Image 2-17: Trackball-cable connections
1
Trackball (right-side) USB connectors from USB910 on the motherboard
5.
Close the lower chassis
1.
Put the lower edge (the edge near the wrist rest) in place first, and then lower the rest of the keyboard
assembly in place.
2.
Set the keyboard assembly in place.
Note:
Do not secure the keyboard assembly in place with its four screws. You will need to raise the
keyboard assembly to route certain cables when making touchscreen assembly connections. You will
secure the keyboard assembly during the final chassis reassembly.
6.
Remove the first two blank keys from the second row of the EC-200 future expansion group buttons. (See #2
in Image 2-14.)
The buttons pop off.
7.
Install the
“
Play/Pause
”
and
“
Stop
”
buttons from the conversion kit.
See #1 in Image 2-19 for the position of the
“
Play/Pause
”
and
“
Stop
”
keys.
Image 2-18:
“
Play/Pause
”
and
“
Stop
”
buttons
8.
Organize the cables as shown in Image 2-19.