24-1701050-00 /01
EC-200 to EC-210 Conversion Kit
7
1.1 ESD recommendations
WARNING:
Always switch power off and unplug the cords from the device before performing any
maintenance operations described in this guide.
WARNING:
The device can be damaged by electrostatic discharge (ESD). When handling the
device and any of its components, caution must be taken so that damage does not occur. Damage
due to inappropriate handling is not covered by the warranty.
CAUTION:
Upgrade at your own risk.
If you are not comfortable with ESD precautions or working with sensitive electronic components,
please refer the upgrade to a qualified Barco service center. Damage due to electrostatic discharge
(ESD) is not covered under warranty.
ESD Precautions
The following precautions must be taken:
•
Perform the Service procedures only at approved anti-static work station equipped with anti-static mat.
•
At all times use a conductive wrist strap attached to a solid earth ground.
•
Always discharge yourself by touching a grounded bare metal surface before coming in contact with ESD
sensitive electronic.
1.2 Ordering the EC-200 to EC-210 conversion kit
The EC-200 to EC-210 conversion kit
The part number for this kit is R9004796. Please contact your local Barco representative to order the
conversion kit.
