Barco NW-12, Руководство пользователя

Страница: 78 / 181

7. Advanced
Image 7-36
8. Press ENTER
A dialog box is displayed
9. Adjust the red white level (gain) on a minimal value
Image 7-37
10.Adjust the blue white level (gain) to a minimal value
Note: this minimal value is not necessary , provided that the 2 other colors are not in fl uencing too much the color to be adjusted,
in fact the aim is to minimize the effect of the two other colors since there is a risk of reaching too soon the transition
(bright spots) due to the contribution of these two other colors signals.
11.Adjust the Green white level (gain) until bright spots appear on the white part of the image
12.Adjust the Blue white level (gain) until bright spots appear on the white part of the image
13.Adjust the Red white level (gain) until bright spots appear on the white part of the image
The projected image should now be noisy neutral grey.
If one uses a checkerboard pattern, the bright spots should appear in the white blocks.
The input balance settings are stored in the image fi le, each source has its own input balance.
7.5 Image fi les
Overview
• Introduction to Image fi les
• Load fi le
• Forced fi le load
• Auto Image
• Edit fi le
• Save as (create a custom fi le)
• Rename fi le
• Copy
• Delete
74 R59770286 NW-12 25/09/2008