Barco NW-12, Руководство пользователя

Страница: 167 / 181

8. Trouble shooting
Description Location Pre fi x Code Message
PB comm PB H 11
power fail
Power supply fail PB H 12 power fail
Invalid fi rmware
XFAN H 20
XFAN fi rmware
XFAN comm XFAN H 21 cooling fail
Cooling supply fail
XFAN H 22
cooling fail
Cyclone con fi gure PMP H 30 FPGA con fi g error
Cyclone init
PMP H 31
FPGA init error
Cyclone fi le error PMP H 32 FPGA fi le error
PIP con fi gure
PMP H 40
FPGA con fi g error
PIP init PMP H 41 FPGA init error
PIP fi le error
PMP H 42
FPGA fi le error
Warp con fi gure PMP H 50 FPGA con fi g error
Warp init PMP H 51
FPGA init error
Warp fi le error PMP H 52 FPGA fi le error
Preformatter con fi gure Preformatter
H 60
FPGA con fi g error
Preformatter init Preformatter H 61 FPGA init error
Preformatter fi le error Preformatter
H 62
FPGA fi le error
DVI-out con fi gure Output layer H 70 FPGA con fi g error
DVI-out init
Output layer
H 71
FPGA init error
DVI-out fi le error Output layer H 72 FPGA fi le error
8.2 Trouble shooting through the OSD
What can be done ?
The projector bus allows the diagnostic of different hardware components divided in two main groups.
• I
2
C diagnostics : a number of internal electronic boards can be diagnosed and a graphical interface shows whether an error is
• Lamps and power supply : lamp temperature and power related failures are logged and can be checked at any time.
• Formatter : Allows to monitor the status and communication of the formatter and satellites
• Cooling : the measured temperatures can be monitored as well as the different fan speeds
• Display mode : allows to monitor the signal characteristics (frequency and mode) at the last image process stage (display)
• Warning messages : setting the warning messages ON will allow to receive on screen warning messages
How to display the I
2
C diagnostics menu ?
1. Press MENU to activate the Tool bar
2. Press → to select the Service item
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select Diagnostics
5. Press → to pull down the menu
6. Use ↑ or ↓ to select I 2 C and press ENTER
Image 8-2
R59770286 NW-12 25/09/2008 163