Barco NW-12, Руководство пользователя

Страница: 80 / 181

7. Advanced
5. Press ENTER
A dialog box is displayed
Image 7-40
6. Use ↑ or ↓ to select the desired fi le
Tip: For more information (speci fi cations) on the image fi les see the Appendix section
7. Press ENTER
The fi le is loaded and the image is adapted.
What to do if the image is not perfect ?
If the displayed image is not correct after AutoImage or after selecting the best fi tting fi le, go to the Edit menu, select the active fi le
and change the settings.
7.5.3 Forced fi le load
Forced fi le load
In some cases the user wants only one particular fi le to be loaded for a particular input (source) i.e. to prevent the (automatic) load
of an inadequate fi le.
One can link a fi le to every possible input of each layer.
If a fi le is already selected (forced) to that particular input it will be indicated in the menu.
How to force a fi le to be loaded ?
1. Press MENU to activate the Tool bar
2. Press → to select the Image fi les item
3. Press ↓ to Pull down the Image fi les menu
4. Use ↑ or ↓ to select Forced fi le load
5. Press → to open the menu
6. Use ↑ or ↓ to select the desired layer (for example Layer 1)
7. Use ↑ or ↓ to select the desired input (for example Data on BNC)
76 R59770286 NW-12 25/09/2008