Barco MDSC-8255 12G, Руководство пользователя

Страница: 43 / 72

43 R5913964 /00 MDSC-8255
5.3.9 Picture and Picture input (MDSC-8255 12G)
About Picture and Picture input
This function allows the display to show a second input source on the left side of the display. The Primary input
(main source) is still displayed on the right half of the screen.
The possible Picture and Picture combinations between the Primary input (main source) and the Secondary
input (PaP image) is displayed in the following table.
Primary input Secondary input
DP 1.1
• HDMI 2.0 – 1
• HDMI 2.0 – 2
• DVI
• SDI 3 (*)
HDMI 2.0 – 1
HDMI 2.0 – 2
• DP 1.1
• DVI
• SDI 3 (*)
DVI
SDI 3 (*)
• DP 1.1
• HDMI 2.0 – 1
• HDMI 2.0 – 2
Both primary and secondary input are limited to FHD resolution max.
The Video Parameters applied to the Primary input Source are also applied to the Secondary input.
The 2nd source keeps the same image size (Native/Aspect) as the Primary input Source.
(*) SDI 3 is only available if the SDI configuration mode is Dual SDI.
To select Picture and Picture input
1. Bring up the OSD main menu.
2. Navigate to the
Input Select menu.
3. Enter the PaP Input submenu.
4. Select one of the available PaP sources (or NONE) and confirm.
5.3.10 Picture in Picture input (MDSC-8255 LED & MNA)
About Picture in Picture input
This function allows the display to show a second input source as an inset window inside the main source.
The possible Picture in Picture combinations between the Primary input (main source) and the Secondary
input (PiP image) is displayed in the following table.
Primary input Secondary input
DP 1.2 MST / 1.1 / Dual
HDMI 2.0
– 1
HDMI 2.0 – 2
• DVI
• SDI
Advanced operation