Barco MDSC-8255 12G, Руководство пользователя

Страница: 14 / 72

R5913964 /00 MDSC-8255 14
16. Potential Equalization pin (POAG)
17. 2
nd (Left) DisplayPort in
18. 100-240 VAC (50-60 Hz) power in
Input and Output 1 to 9 are directly connected to the embedded Nexxis decoder.
The BNC SDI connectors match the characteristic impedance of 75 ohm cables.
2.3.3 MDSC-8255 12G
Overview
4 8 10 14 11 12 13 3 2 1 15
5 6
7
9
Image 2 – 5
1. SDI 1: Single link in or Quad link in top left (*)
2. SDI 2: Single link out or Quad link in top right (*)
3. SDI 3: Single link in or Quad link in bottom right (*)
4. SDI 4: Single link out or Quad link in bottom left (*)
5. HDMI 2 in
6. HDMI 1 in
7. +5 VDC
– 2 A power out (connector type: mating connector HIROSE RP34L-5PA- 2SC)
8. USB 2.0 type A interface
9. USB 2.0 type B interface
10. Main (Right) DisplayPort in
11. DVI-D in
12. DVI-D out
13. Potential Equalization pin (POAG)
14. 2
nd (Left) DisplayPort in
15. 100-240 VAC (50-60 Hz) power in
(*) See “ SDI config (only for MDSC-8255 12G) ” , page 40 about the possible SDI configuration modes.
The BNC SDI connectors match the characteristic impedance of 75 ohm cables.
2.4 Connector pin assignments
2.4.1 DVI connector (DVI-D)
Overview
Image 2 – 6
1. D2_Rx- (T.M.D.S.)
2. D2_Rx+ (T.M.D.S.)
3. GND (data 2 shield)
Parts, controls and connectors