3. Display installation
7. Pull out the foot lock clip.
8. Retain the clip for possible further transportations.
9. Now that the height-positioning is unlocked, you can adjust the position of the displays.
Note:
When both displays are not correctly aligned, minor corrections are possible in relative height
and relative angle, by loosening and tightening the opposite pairs of allen screws (opposite sides
or opposite diagonals) of the positioning sliders.
3.2
VESA-mount installation
The display mounting anchor is compatible with the VESA 100 mm standard.
W
ARNING
:
Never move a display attached to an arm by pulling or pushing the display
itself. Instead, make sure that the arm is equipped with a VESA approved handle and
use this to move the display.
Please refer to the instruction manual of the arm for more information and instructions.
W
ARNING
:
Use an arm that is approved by VESA (according to the VESA 100 mm stan-
dard).
Use an arm that can support the weight of the display. Refer to the technical speci
fi
ca-
tions of this display for the applicable weight.
Overview
The display mounting anchor is compatible with the VESA 100 mm standard.
1. Unscrew the four
fi
xation screws in the mounting anchor.
10
K5902035
MAMMO
TOMOSYNTHESIS
07/12/2017
