Barco MDCC-4230, Руководство пользователя

Страница: 34 / 55

5. Advanced operation
2. Navigate to the Con fi guration > Image Sources menu.
3. Enter one of the available submenus as desired.
4. Select one of the available connectors/inputs and con fi rm.
5.25 Grayscale conversion modes
Your Coronis Fusion 4MP / 6MP display automatically detects the connected video in-
put signals and applies the correct grayscale conversion settings. Manually selecting a
grayscale conversion mode is possible, but then your display’s image source selection
mode should be set to allow this. Please refer to "Image source selection modes", page
30 to do this.
About grayscale conversion modes
Grayscale conversion modes specify how color generated on the display controller is converted to
grayscale in your display.
The available grayscale conversion modes are:
No Conversion
Use Red Channel
This mode is intended for grayscale displays where
gray is sent over the red channel.
Use Green Channel This mode is intended for grayscale displays where
gray is sent over the green channel.
Use Blue Channel This mode is intended for grayscale displays where
gray is sent over the blue channel.
To manually select a grayscale conversion mode:
1. Bring up the OSD main menu.
2. Navigate to the Con fi guration > Image Sources > Input Settings > DisplayPort 1/2, DVI 1/2 menu.
3. Enter the Grayscale Conversion submenu.
4. Select one of the available color conversion modes and con fi rm.
5.26 EDID format
About EDID format
The Coronis Fusion 4MP / 6MP supports two EDID formats: E-EDID V1.4 and DisplayID V1.3
To select the EDID format
1. Bring up the OSD main menu.
2. Navigate to the Con fi guration > Image Sources > Input Settings menu.
3. Enter the EDID format submenu.
4. Select one of the available format and con fi rm.
32 K5902056 CORONIS FUSION 4MP / 6MP 31/10/2014