Barco MDCC-4230, Руководство пользователя

Страница: 16 / 55

3. Display installation
2. Slide the cover upwards while holding the lower sides pulled open.
3. Lift the plastic frame that covers the fi xation of the panel to the stand. Turn it for 45 degrees to uncover
the fi xation screws.
4. Unscrew the four fi xation screws fi xing the panel to the stand.
5. Attach the panel fi rmly to the arm using 4 screws M4 x 10 mm.
W
ARNING
:
Never move a display attached to an arm by pulling or pushing the display
itself. Instead, make sure that the arm is equipped with a VESA approved handle and
use this to move the display.
Please refer to the instruction manual of the arm for more information and instructions.
3.9 First time starting up
Overview
You are now ready to start up your Coronis Fusion 4MP / 6MP for the fi rst time.
14 K5902056 CORONIS FUSION 4MP / 6MP 31/10/2014