Barco MDCC-4230, Руководство пользователя

Страница: 33 / 55

5. Advanced operation
Two Image Sources This mode is intended for displaying and manually
con
fi guring two connected video input signals (one
on each display side). When selecting this mode,
the video settings become available for the selected
video input signal on each side of the display.
Expert mode This mode is intended for displaying and manually
con
fi guring one or two connected video input
signals. When selecting this mode, the video
settings become available for both video input
signals on both sides of the display.
To select an image source selection mode:
1. Bring up the OSD main menu.
2. Navigate to the Con fi guration > Image Sources menu.
3. Enter the Image Source Selection submenu.
4. Select one of the available image source selection modes and con fi rm.
5.24 Video input signals
Your Coronis Fusion 4MP / 6MP display automatically detects the connected video input
signals. Manually video input con
fi guration is possible, but then your display’s image
source selection mode should be set to allow this. Please refer to "Image source selec-
tion modes", page 30 to do this.
About input con fi guration
Depending on the image source selection mode, following inputs can be con fi gured:
Menu Image source selection
mode
Input Signal 1 Image Source Connector con fi guration (DisplayPort 1/2, DVI
1/2) for the input signal.
Left Input Signal Connector con fi guration (DisplayPort 1, DVI 1)
for the left input signal.
Right Input Signal
2 Image Sources
Connector con fi guration (DisplayPort 2, DVI 2)
for the right input signal.
Left Input signal (input 1/2) con fi guration for the left
side of the screen.
Right
Input signal (input 1/2) con fi guration used for the
right side of the screen.
Input 1 signal Connector con fi guration (DisplayPort, DVI) for
input 1 signal.
Input 2 signal Connector con fi guration (DisplayPort, DVI ) for
input 2 signal.
Auto input selection
Expert mode
Automatic input selection con fi guration.
In expert mode, Left and Right can only be con fi gured when the Auto input selection
feature is disabled.
To manually con fi gure the video input signal(s):
1. Bring up the OSD main menu.
K5902056 CORONIS FUSION 4MP / 6MP 31/10/2014 31