Barco MDCC-4230, Руководство пользователя

Страница: 32 / 55

5. Advanced operation
2. Navigate to the Con fi guration > Calibration > Ambient Light menu.
3. Enter the Continuous ALC submenu.
4. Select Enabled/Disabled as desired and con fi rm.
5.22 Image scaling
About image scaling
Enabling image scaling will multiply each individual pixel to one or more adjacent pixels so that the size
of the displayed image will be a multiple of the original image source video input signal.
Image scaling is only possible when the resolution of your display’s video input signal
is less than or equal to half the maximum resolution of the display.
To enable/disable image scaling:
1. Bring up the OSD main menu.
2. Navigate to the Con fi guration > Image Source menu.
3. Enter the Scaling submenu.
4. Select Enabled/Disabled as desired and con fi rm.
5.23 Image source selection modes
About image source selection modes
Your Coronis Fusion 4MP / 6MP automatically detects the number of video input signals connected, at-
taches them to the correct display side and applies the correct video settings to it (resolution, video encod-
ing mode, refresh rate,...). However, it may be needed to manually select the video input signal(s) to be
displayed on a certain display side or to adjust certain video settings yourself. The start to this is selecting
one of the following image source selection modes available for your display:
Automatic In this mode, your display automatically detects the
connected video input signals, attaches them to the
correct display side and applies the correct video
settings to it (resolution, video encoding mode,
refresh rate,...). No video settings are available
when this mode is selected.
One Image Source This mode is intended for displaying and manually
con
fi guring only one connected video input signal.
When selecting this mode, the video settings
become available for the selected video input
signal.
30 K5902056 CORONIS FUSION 4MP / 6MP 31/10/2014