Barco IEX Series, Инструкция по установке и эксплуатации

Страница: 35 / 80

35 R5915190 /01 IEX series
Red
：
Adjust the red brightness value of calibration coefficients.
Green
：
Adjust the green brightness value of calibration coefficients.
Blue
：
Adjust the blue brightness value of calibration coefficients.
6. Click Save to save the correction coefficients to the hardware. The saved coefficients are retentive even
after a power failure.
7. Click Finish .
Image 4 – 18 Saving correction coefficients
4.3.6 Setting Coefficients for a New Module
How to set
1. Select Position of the New Module.
Select Topology or List .
Image 4 – 19 Selecting cabinet for the new module
2. Select the position of the receiving card where the new module is located. Double click the selected
position
3. Next to Display Mode , select Modules .
Select the position of the new module and click Next .
LED Display Control Setting