Barco Galaxy WARP 7 HC, Руководство пользователя

Страница: 38 / 154

5. Getting Started
COLOR
CONTRAST
PHASE
SHARPN
TINT
BRIGHTN
STANDBY
ENTER
TEXT
EXIT
PAUSE
2 1
4
3
5 6
8
0
9
7
F1
F2
F3
F4
F5
ADJ
EXIT
ENTER
PAUSE
PHASE
TEXT
SHARPN
TINT
COLOR
BRIGHTN
CONTR
TREBLE BALANCE
BASS VOL
9 0
7
8
5 6
3 4
1
2
1
2
3
4
5
6
7
8
9
10
18
Stand-by
Pause/Park
Sharpness
Tint
Color
Brightness
Contrast
17
16
15
14
13
12
11
Image 5-1
RCU & Local Keypad overview
1 Function keys user programmable keys with functions for direct access.
2 ADJ. Adjust key, to enter the adjustment mode
3 Address key (recessed key), to enter the address of the projector (between 0 and 9). Press the recessed
address key with a pencil, followed by pressing one digit button between 0 and 9.
4 Selection key (*) to direct access the zoom/focus/shift functions.
5 PAUSE to stop projection for a short time, press ’PAUSE’. The image disappears but full power is
retained for immediate restarting.
6 STBY standby button, to start projector when the power switch is switched on and to switch off the
projector without switching off the power switch.
Attention : Switching to Standby. When the projector is running and you want to
go to standby, press the standby key for 2 seconds until the message ’Saving data,
please wait’ is displayed. Do not press any longer on the standby key otherwise
the projector will restart.
7 MUTE not used
8 ? not used
9 Digit buttons direct input selection.
10 Audio controls not used
11 Picture controls use these buttons to obtain the desired color setting.
12 Phase used to remove the instability of the image.
13 FREEZ press to freeze the projected image.
14 TEXT when adjusting one of the image, e.g. controls during a meeting, the displayed bar scale
can be removed by pressing ’TEXT’ key first. To re-display the bar scale on the screen,
press ’TEXT’ key again.
15 ENTER to start up the adjustment mode or to confirm an adjustment or selection in the adjustment
mode.
34 R5976755 BARCO GALAXY WARP™ 7 HC 05/04/2004