Barco Galaxy WARP 7 HC, Руководство пользователя

Страница: 146 / 154

8. Service Mode
How to display the Formatter Diagnosis screen?
1. Push the cursor key ↑ or ↓ to highlight
Formatter
. (menu 8-35)
2. Press
ENTER
to select.
The
Formatter
Diagnosis screen will be displayed. (menu 8-36)
3. Press
EXIT
to return to the
Service Mode
menu.
DIAGNOSIS
I2C
FORMATTER
SMPS
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 8-35
FORMATTER
I2C (34H) OK
CONFIGURATION OK
INITIALISATION OK
SELF TEST OK
RED DISPLAY OK
GREEN DISPLAY OK
BLUE DISPLAY OK
<EXIT> to return
Menu 8-36
8.13.4 SMPS Diagnosis
What can be done?
This info screen will give an overview of the status of the Switch Mode Power Supply (SMPS) board.
How to display the SMPS Diagnosis screen?
1. Push the cursor key ↑ or ↓ to highlight
SMPS
. (menu 8-37)
2. Press
ENTER
to select.
The
SMPS
Diagnosis screen will be displayed. (menu 8-38)
3. Press
EXIT
to return to the
Service Mode
menu.
DIAGNOSIS
I2C
FORMATTER
SMPS
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 8-37
SMPS
I2C (30H) OK
AMBIENT TEMPERA OK
NTC OK
TILT SWITCH OK
MICRO SWITCH OK
LAMP TEMPERATUR OK
LPS MAINS OK
SMPS OUTPUT OK
<EXIT> to return
Menu 8-38
8.14 DynaColor™
This menu item is only usefully when working with a multichannel setup.
To connect the projectors follow the same guidelines as discribed in Constant Light Output.
In a Linked CLO and/or Dynacolor™ setup a maximum of 14 projectors can be linked, all projectors must have
a different projector address between 0 and 13 and all projectors must have the same baudrate.
What can be done?
DynaColor™ will eliminate channel-to-channel color variations.
How to define color?
The CIE chromaticity diagram is one way to plot the colors the human eye can see.
142 R5976755 BARCO GALAXY WARP™ 7 HC 05/04/2004