Barco DP2K SLP Series, Руководство по обслуживанию

Страница: 368 / 410

R5906848 /04 DP2K SLP Series 368
Code 21113: “ LDM 1-2 – LLS bank 1 drain power too high ”
Situation Solution
This error appears together
with a blue taillight on the
projector. There will be an impact on the performance, although not noticeable.
In order to bring the projector back to DCI color spec, perform the
following actions:
• Use Communicator to block all bad laser banks.
• Perform a full color calibration.
For more info, see Communicator User manual.
This error appears together
with a yellow taillight on the
projector. There will be a noticeable impact on color performance and/or brightness.
The projector will still play, but will probably no longer play within the DCI
specifications.
Replace the light source. See service procedure
“ Laser Phosphor Light
Source ” , page 59.
This error appears together
with a red taillight on the
projector Projector will shut down / no longer start up, until sufficient service actions
have been taken.
Replace the light source. See service procedure
“ Laser Phosphor Light
Source ” , page 59.
Code 21117: “ LDM 1-2 – LLS bank 2 drain power too high ”
For this error the same troubleshooting table can be applied to as for code 21113 : “ LDM 1-2 – LLS bank 1
drain power too high ” .
Code 21121: “ LDM 1-2 – LLS bank 3 drain power too high ”
For this error the same troubleshooting table can be applied to as for code 21113 : “ LDM 1-2 – LLS bank 1
drain power too high ” .
Code 21125: “ LDM 1-3 – LLS bank 4 drain power too high ”
For this error the same troubleshooting table can be applied to as for code 21113 : “ LDM 1-2 – LLS bank 1
drain power too high ” .
Code 21129: “ LDM 1-3 – lls bank 5 drain power too high ”
Situation Solution
Problem on mixed laser bank.
Laser bank will shut down Replace the light source. See service procedure “ Laser Phosphor Light
Source ” , page 59.
Code 21133: “ LDM 1-3 – lls bank 6 drain power too high ”
Situation Solution
Problem on blue laser bank.
Laser bank will shut down Replace the light source. See service procedure “ Laser Phosphor Light
Source ” , page 59.
Code 21137: “ LDM 1-4 – LLS bank 7 drain power too high ”
For this error the same troubleshooting table can be applied to as for code 21133 : “ LDM 1-3 – LLS bank 6
drain power too high ” .
Code 21141: “ LDM 1-4 – LLS bank 8 drain power too high ”
For this error the same troubleshooting table can be applied to as for code 21129 : “ LDM 1-3 – LLS bank 5
drain power too high ” .
Troubleshooting