4. Troubleshooting
•
command (port = /dev/ttyS2:0) - set network ip-address to 10.140.162.141 (dhcp off)
= From the
touch panel, the IP address of the projector was set to 10.140.162.141
•
command (port = 10.36.62.17:43680) - set network ip-address to 10.36.62.62 (dhcp off)
= From a
device with IP address 10.36.63.17, the IP address of the projector was changed to 10.36.63.17
•
command (port = /dev/ttyS0:0) - set dowser open
. = From a touch panel or PC, connected serially (connector
labeled "Touch panel"), the dowser was set to open.
•
command (port = /dev/ttyS0:0) - set lamp off
= From a touch panel or PC, connected serially (connector labeled
"Touch panel"), the lamp was powered off.
•
command (port = internal) - set lamp off
= For an internal reason the state of the lamp was set to off.
•
command (port = button) - set dowser closed
= The dowser was closed from the keypad.
The error messages are explained in the troubleshooting list - code 5831
ICP log
fi
les
Example of log
fi
le content :
2010/04/06 09:02:40.964797 I
ICP application 1.2(126) init
Shows the ICP package
2010/04/06 09:02:40.980964 I
successfully initialized the LoginLevelProtection mutex
2010/04/06 09:02:41.039022 I
Autotiming initialized
2010/04/06 09:02:41.049829 I
Autotiming using VSyncs
2010/04/06 09:02:41.051245 I
Started Autotiming Port threads
2010/04/06 09:02:41.051755 I
Autotiming started
2010/04/06 09:02:41.052149 I
Port thread running
2010/04/06 09:02:41.052897 I
Port thread running
2010/04/06 09:02:43.632304 I
Started Autotiming Main thread
2010/04/06 09:02:43.633017 D
Autotiming thread running
2010/04/06 09:02:43.633476 D
Autotiming: blank the image
2010/04/06 09:02:43.792939 D
Autotiming: unblank the image
...
Format
‘Date Time’ ‘Severity’ ‘message’
Where :
•
‘Date Time’
= the time when the event occurred.
•
‘Severity’
= One character severity indication can be : ’D” (Debug) – “E” (Error) – “I” (Informational) - “U” (User).
•
‘message’
= The actual error message.
Example :
24.03.2010 17:17:12.185 TPPL = 2848, APPL = 2048, TLPF = 4095, ALPF = 128
This line is entered when the auto timing on the ICP computes values that are not within valid ranges.
Where :
•
TPPL
= Total Pixels Per Line
•
APPL
= Active Pixels Per Line
•
TLPF
= Total Lines Per Frame
•
ALPF
= Active Lines Per Frame
•
512 <= APPL <= TPPL <= 8191
•
288 <= ALPF <= TLPF <= 4095
In this example ALPF = 128 which is less than the minimum of 288. When this happens, auto timing will attempt to blank the image.
76
R5905043 DP2K-12C/11CX 19/02/2018
Содержание DP2K-12C
