Barco DP2K-12C, Руководство по обслуживанию

Страница: 124 / 359

6. Lamps and lamp houses
6
7
Image 6-44
7. Place a new re fl ector assembly upon the anode side of the lamp house and fasten with 8 hexagon head cap screws (reference
7 image 6-44). Use a 2,5 mm Allen wrench. These screws must have a length of 10 mm. Make sure to position the re fl ector
assembly correctly.
Caution: Do not touch the glass of the re fl ector assembly. Hold fast the re fl ector assembly by its metal mounting plate.
8. Reinstall the cathode side of the lamp house (see middle drawing of image 6-44). Fasten with 8 hexagon head cap screws
(reference 6 image 6-44). Use a 2,5 mm Allen wrench.
9. Reinstall the bottom pro fi les. See image 6-43. Use a 2,5 mm Allen wrench.
10.Guide the cathode wire inside the lamp house as illustrated.
Image 6-45
11.Reconnect the cathode wire with the lamp house. Make sure to place a washer (reference 2 and 4 ) between the nuts and the
eye of the cathode wire (reference 3). Use a torque of 9 Nm to fasten the nuts (reference 1 and 5). Block the fi rst nut (reference
1) with a 17 mm open-end wrench while applying a torque of 9 Nm on the second nut (reference 5) with a torque wrench.
1 2 3 4 5
9 Nm 9 Nm
Image 6-46
12.Reinstall the side cover of the lamp house.
120 R5905043 DP2K-12C/11CX 19/02/2018