Barco DP2K-12C, Руководство по обслуживанию

Страница: 38 / 359

4. Troubleshooting
1
2
3
Image 4-10
Anode fan connections
Code 5073: “lamp anode fan - speed low” (Warning)
Situation Solution
Wire unit (reference 1image 4-11) of
the Anode Fan is disconnected. Remove the left side cover of the projector and check the connection of the Anode Fan.
Wire unit (reference 3 image 4-11)
of the fan units is disconnected from
the Signal Backplane. Remove the front cover and front dust fi lter from the projector and check if the wire unit
(reference 53 image 4-11) is inserted in the Signal Backplane.
Blocked Anode Fan (reference 2
image 4-11). Check if the Anode Fan is not blocked. Ensure that the Anode Fan can turn freely.
Damaged wire unit. Check if the wire unit of the Anode Fan is not damaged. Repair if possible, otherwise
replace with new one.
Malfunction Fan & Motor Control
board. Replace the Fan & Motor Control board. See "Removing a board in the card cage",
page 213.
Anode fan (reference 2 image 4-11)
end of life. Replace the Anode Fan. See "Lamp anode fan", page 324.
1
2
3
Image 4-11
Anode fan connections
Code 5082: “lamp cathode fan - speed too low” (Error)
Situation Solution
Wire unit (reference 1image 4-12) of
the Cathode Fan is disconnected. Remove the left side cover of the projector and check the connection of the Cathode Fan.
34 R5905043 DP2K-12C/11CX 19/02/2018