Barco DCINE PREMIERE DP30, Руководство по установке

Страница: 25 / 47

3. Installation Guidelines
3.5.2.2 Anamorphic lens holder support rod mounting
Necessary tools
• Hexagon Ball driver 5mm
• Screwdriver 8mm
Getting access to the support rod block
1. Loosen the screw in the side panel (1) (side of power connection).(image 3-27)
2. Push both quick locks upwards (2) and rotate the cover plate a little bit to you (3).
3. Take off the cover plate.
Mounting the support rod
1. Loosen the four bolts of the lens holder support rod block. (image 3-16)
2. Pull out the plastic cover on the front side. (image 3-17)
3. Slide the support rod from the front side into the support rod block, in such a way the top of the rod enters entirely the support
rod block. Be sure the groove matches the support fixation bar. (image 3-18, image 3-19)
Note: The side of the rod with the shortest groove lenght has to be inserted into the projector.
4. Secure the rod in the fixation block by tightening the 4 screws.
5. Reinstall the side cover.
Image 3-16
Support rod block
Image 3-17
Support rod input
Image 3-18
Groove in support rod Image 3-19
Insertion in the support rod block
R5976572 DCINE PREMIERE DP30 17032003 21