Barco DCINE PREMIERE DP30, Руководство по установке

Страница: 8 / 47

1. Safety Instructions
Shock Hazard
Image 1-1
Safety Warning
To prevent fire or electrical shock hazard, do not expose this projector to rain or moisture
1.2 Electrical Safety
Ratings & Grounding
• This product should be operated from an AC power source. Check if the mains voltage and ampacity matches the projector
electrical ratings.
• This product is equipped with a 3-terminal power connector. If you are unable to install the AC Requirements, contact your
electrician. Do not defeat the purpose of the grounding.
General about Projector
• Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord.
• Always unplug from electrical outlet before cleaning and servicing and when not in use. Never yank cord to pull plug from outlet.
Grasp the plug and pull to disconnect.
• Do not operate projector with a damaged cord or if the projector has been dropped or damaged - until it has been examined by
a qualified serviceman.
• Position the cord so that it will not be tripped over, pulled, or contact hot surfaces.
• If an extension cord is necessary, a cord with a current rating at least equal to that of the appliance should be used. A cord
rated for less amperage than the appliance may overheat.
• Let projector cool completely before storing. Remove cord from projector when storing.
• Always connect this projector to an electrically grounded outlet. Never use a ground bypass ("ground lift" or 3 to 2 adapter)
adapter.
• Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out
parts that could result in a risk of fire or electrical shock.
• Never spill liquid of any kind on the product. Should any liquid or solid object fall into the cabinet, unplug the set and have it
checked by qualified service personnel before resuming operations.
• Lightning - For added protection for this video product during a lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and disconnect media and communication cables. This will prevent damage
to the projector due to lightning and AC power-line surges.
1.3 Heat and Fire Hazards
Warning Risk of Fire
Warning Risk of Fire: Do Not Place Flammable or Combustible Materials Near Projector !
BARCO large screen projection products are designed and manufactured to meet the most stringent safety regulations. This pro-
jector radiates heat on its external surfaces and from ventilation ducts during normal operation, which is both normal and safe.
Exposing flammable or combustible materials into close proximity of this projector could result in the spontaneous ignition of that
material, resulting in a fire. For this reason, it is absolutely necessary to leave an “exclusion zone” around all external surfaces of
the projector whereby no flammable or combustible materials are present. The exclusion zone must be not less than 40 cm (16”)
for all DLP Cinema™ projectors. The exclusion zone on the lens side must be at least 5 m. Do not cover the projector or the lens
with any material while the projector is in operation. Keep flammable and combustible materials away from the projector at all times.
Mount the projector in a well ventilated area away from sources of ignition and out of direct sun light. Never expose the projector to
rain or moisture. In the event of fire, use sand, CO
2
, or dry powder fire extinguishers; never use water on an electrical fire. Always
have service performed on this projector by authorized BARCO service personnel. Always insist on genuine BARCO replacement
parts. Never use non-BARCO replacement parts as they may degrade the safety of this projector.
4 R5976572 DCINE PREMIERE DP30 17032003