Barco DCINE PREMIERE DP30, Руководство по установке

Страница: 23 / 47

3. Installation Guidelines
Control OUT
Image 3-13
D9 Female connector
1
-
6 RXA+ Data Set Ready (DSR)
2 RXA- Receive Data (RD or RX or RXD) 7
-
3 TXA- Transmitted Data (TD or TX or TXD) 8
-
4TXA+ Data Terminal Ready (DTR) 9
-
5 GND Signal Ground (GND)
- -
3.5 Lenses
Overview
• Installation of the prime lens
• Installation of the anamorphic lens
• Cleaning the lens
• Lens formulas
3.5.1 Installation of the prime lens
How to install?
Follow the next procedure:
1. Remove the foam rubber in the opening of the lens holder.
2. Take the lens assembly out of its packing material and remove the lens caps on both sides.
3. Move the handle (A) of the lens anchor system to the right. (image 3-14)
4. Push the lens in the lens block gap horizontally, lining up the motor connector on the lens with the connector on the lens block
(B), until the lens clicks in the lens anchor system.
R5976572 DCINE PREMIERE DP30 17032003 19