Barco DCINE PREMIERE DP30, Руководство по установке

Страница: 30 / 47

3. Installation Guidelines
Without anamorphic lens With anamorphic lens Prime lens
Metric Inch Metric Inch
SDC(2-2.8:1) PD
min
=2.00xSW-0.17
PD
max
=2.84xSW-0.24
PD
min
=2.00xSW-6.69
PD
max
=2.84xSW-9.45
PD
min
=2.00xSW/AnF-
0.17
PD
max
=2.84xSW/AnF-
0.24
PD
min
=2.00xSW/AnF-
6.69
PD
max
=2.84xSW/AnF-
9.45
SDC(2.8-5:1) PD
min
=2.80xSW-0.16
PD
max
=5.10xSW-0.38
PD
min
=2.80xSW-6.30
PD
max
=5.10xSW-14.96
PD
min
=2.80xSW/AnF-
0.16
PD
max
=5.10xSW/AnF-
0.38
PD
min
=2.80xSW/AnF-
6.30
PD
max
=5.10xSW/AnF-
14.96
SDC(5-8:1) PD
min
=4.90xSW-0.01
PD
max
=8.16xSW-0.29
PD
min
=4.90xSW-0.39
PD
max
=8.16xSW-11.42
PD
min
=4.90xSW/AnF-
0.01
PD
max
=8.16xSW/AnF-
0.29
PD
min
=4.90xSW/AnF-
0.39
PD
max
=8.16xSW/AnF-
11.42
• SW = screen width in meter or inch
• PD
min
= minimum distance between screen and projector.
• PD
max
= maximum distance between screen and projector.
• AnF = anamorphic factor of used anamorphic lens (e.g. 1.5, 1.9)
3.6 Lamp Installation
Getting access to the lamp house
1. Loosen the screw in the side panel (1) (side of power connection). (image 3-27)
2. Push both quick locks upwards (2) and rotate the cover plate a little bit to you (3).
3. Take off the cover plate.
Image 3-27
Side cover removal
Installing the lamp
1. Take the lamp out of its packaging material.
2. Remove the lock nut on the 3 spacer screws (A). (image 3-28)
3. Line up the lamp unit guides with the guides on the projector frame (B) and push the unit into the frame until it fits. (image 3-29)
4. Secure the position of the lamp unit with the 3 spacer screws (C).
26 R5976572 DCINE PREMIERE DP30 17032003