![background image](http://html1.mh-extra.com/html/barco/data-708hs-r9002230/data-708hs-r9002230_owners-manual_473988021.webp)
5-1
Start Up of the Adjustment Mode
5975589 BARCODATA 708 HS 080998
5
START UP OF THE ADJUSTMENT MODE
Adjustment Mode
All picture geometry and convergence adjustments are made while in the 'Adjustment mode'. To enter the adjustment mode :
ADJUSTMENT MODE
Select a path from below:
IRIS
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
source 1
Select with
ê
or
é
then <ENTER>
<EXIT> to return
WARNING
RISK OF ELECTRICAL SHOCK
NO USER ADJUSTABLE PARTS INSIDE
THE FOLLOWING
INSTALLATION MENUS
ARE RESERVED TO,
AND TO BE PERFORMED ONLY
BY BARCO PERSONNEL, OR
BARCO AUTHORIZED DEALERS
IF QUALIFIED, PRESS
<ENTER> TO CONTINUE, OR
IF NOT, <EXIT> TO RETURN.
Press the
ADJUST
key.
The projector displays the path selection menu.
You are now in the
'Adjustment mode'
. The control disk is used to
make menu selections and also vertical and horizontal adjustments.
The
ENTER
and
EXIT
keys are used to move forward and backward
through the menu structure. The
ADJUST
key can be used to
terminate the adjustment mode while a path selection menu (head
menu) is displayed.
There are 5 possible paths to follow once in the Adjustment mode.
They are :
IRIS
- This selection will only be available when the auto-alignment
unit IRIS is connected to the projector.
GUIDED
- Guided should be selected if the user intends to perform
a complete alignment of the projected image. All of the necessary
geometry and convergence adjustments are made in a predeter-
mined sequence.
RANDOM ACCESS
- Random Access should be selected if the user
intends to make only a few adjustments.
INSTALLATION
- Installation should be selected if the projector has
been relocated and/or a different screen size is desired.
When selecting 'Installation', the user or operator will be warned to
call a qualified technician to perform the installation procedure (see
example of projected warning on next page).
SERVICE
- Service should be selected if the user intends to delete
blocks, change password or apply information.
While in Guided or Random Access adjustment Mode, the user may
use an external source, an internally generated genlocked pattern or
an internally generated multi-frequency cross hatch pattern as a
setup pattern.
Warning during the start up of the installation mode.
Содержание DATA 708HS R9002230
